Home - Product - Jaw Crusher
Jaw Crusher
PE series jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. Jaw crushers are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slags, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.
Features Of Jaw Crusher:
- The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity;
- It has a big crushing ratio and even grain shape.
- The gasket type inlet size makes flexible adjustment posible, and it’s reliable, conveinent, and with a big adjustment range,which can greatly enhance the flexibility of the equipments.
- It has a simple structure, and is quite stable and low in operation cost.
- The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system;
Technical Parameter
Mm to inch conversion: 25.4millimeters=1 inch
Model | Max. Feeding Size (mm) | Discharge Size (mm) | Capacity (t/h) | Motor Power (kW) | Overall Dimensions (mm) | Weight (t) |
PE400×600 | 350 | 40-100 | 15-60 | 30 | 1700×1732×1653 | 6.5 |
PE500×750 | 425 | 50-100 | 50-100 | 55 | 2035×1921×2000 | 10.3 |
PE600×900 | 480 | 65-160 | 60-130 | 75 | 2290×2206×2370 | 16.5 |
PE750×1060 | 630 | 80-140 | 80-180 | 110 | 2620×2302×3110 | 29 |
PE900×1200 | 750 | 95-165 | 140-260 | 110 | 3789×2826×3025 | 54.5 |
PE1000×1200 | 850 | 195-265 | 315-550 | 110 | 3335×3182×3025 | 57 |
PE1200×1500 | 1020 | 150-300 | 400-800 | 160-220 | 4200×3750×3820 | 100.9 |
Note: Any change of jaw crusher technical data shall not be advised additionally.
Purchase Now
Please simply complete the form below, we will contact you shortly.